dcl20
DCL20 is an induction loop kit which enables to equip reception desks or counter. This system enables to meet equal opportunity standards and provide accessibility to hearing-impaired people who own a hearing-aid with « T » position.
The provided kit includes the induction loop amplifier, a microphone, a loop, a power block and 3 « adapted for hearingimpaired area » stickers. The device includes an audio processing which enables to have an automatic sound recording level enslavement avoiding loud and sudden noises.
DCL20
The induction loop
DCL20-K
Induction loop kit : DCL20 + micro (OP-M)
DCL20-K1
Induction loop kit : DCL20 + micro (OP-M80)
DCL20-K2
Induction loop kit : DCL20 + micro (OP-M80) + receiver (OP-E3)
DCL20-E3
Induction loop kit : DCL20 + micro (OP-M) + receiver (OP-E3)
DCL20-WALL
Induction loop kit : DCL20 + micro (OP-M) + pictogram (OP-WALL2)
DCL20-PLUG
Induction loop kit : DCL20 + micro (OP-M) + pictogram (OP-WALL2) + easel (OP-CW2)
DCL20-SA
Induction loop kit : DCL20 + micro (OP-M) + coil (LC-ROOM)
DCL20-TV
Induction loop kit : DCL20 + micro (OP-M) + coil (LC-ROOM) + adapter (OP-TosLink)
Caracteristics
| INPUT | |
| Input | 2 : 1 micro or line input + 1 line input |
| Type | Micro Jack 3,5 mm, terminal block |
| Phantom | 4,5 V 1 mA |
| POWER | |
| Caracteristics | 12 V DC 1,5 A |
| Type | Separated power block |
| Voltage | 230 V 50/60 Hz |
| Power | 20 W max |
| Fuse | Thermal |
| AUDIO PROCESSOR | |
| Compressor | Variable 1:1 to 20:1 |
| Etching | 10 mS |
| Lowering | Automatic 500 mS or 1 500 mS |
| Noise reduction | Limited bandwith for 8 kHz total gain, 16 kHz – 6 dB |
| Dynamic | > 60 dB |
| THD | < 0,5 % |
| OUTPUT | |
| Type | Current |
| Loop impedance | 0,1 Ohm to 1 Ohm |
| Peak current | 3,5 A |
| RMS Power | 1,5 A to 1 kHz |
| Protection | Termal, short circuit and start |
| SIZE AND WEIGHT | |
| DCL20 | 92 x 52 x 18 mm |
| Packaging | 190 x 190 x 50 mm |
| Weight | 0,850 kg |