LD2.0

Description

The Opus Technologies LD2.0 is the next-generation perimeter magnetic loop amplifier. Continuous 7Arms output current capable and all necessary functionalities (AGC, MLC, etc) ensure rooms installation of 450m².

The amplifier incorporates a fault synthesis that controls continuously the loop and the amplifier. The information is displayed on the front panel and can be deported thanks to a dry contact.

The LD2.0 can also be used in a low diaphonic phased loop system or an ultra high coverage system witha built-in 90° or 0° phase shift module (2 amplifiers). Solution used for the equipment of large rooms or adjoining rooms (hairpin systems).

The LD2.0 proven technology and quality of manufacturing allow us to offer a 5 years warranty.

Advantages

Class D amplifier
Ultra compact design
Total efficiency up to 92%
Fanless convection
Hight output voltage up to 48Vpk
Automatic gain control
Metal loss correction
Wall rounting attachment
Continuous loop monitoring with NO-NC relay
5 years warranty

Characteristics

LD2.0
Coverage	450 m² (15*30 m²)
Operating temperature	0 to +45°C
Storage temperature	-30 to +70°C
INPUT
Audio inputs	3 inputs: x2 line/microphone, x1 100V
Connector type	Phoenix and/or Combo Neutrik
Phantom supply	12V 2mA
Sensitivity	-50dB microphone, +40dB 100V, -10dB line
Priority	100V input, INPUT 1
POWER SUPPLY
Type	Integrated
Voltage	115/230V (automatic) 50/60 Hz
Nominal power consumption at 1 Ohm	50 W
Maximum input power	<300VA
Consumption at rest on connected loop	9W at 230V AC, 1 loop of 1 Ohm connected, at ambient temperature after 30 minutes of stabilization
AUDIO CHARACTERISTICS
THD	<0,5% @1ohm / 1KHz / nominal current
Automatic gain control	AGC optimized for speech Dynamic > 36dB
Bandwidth	80 Hz to 9,5 kHz at -3 dB
OUTPUT
Loop impedance	0,5Ω à 3Ω
Output voltage	34V rms(48V pK)
Peak current	11A pK
RMS current	7A rms
Slave output	0°or 90°phase shift
ADDITIONAL FUNCTIONS
LED display	«Power», «Protect», «Clip», «Loop»
Metal loss correction	0 to 3 dB per octave
Relay	NO/NC fault relay 0,5A/125Vac, 1A/24VDC
DIMENSIONS (MM)
HxLxD	42 x 200 x 215 mm
Weight	1,48 kg